KNX IP Router

IP-Router / Interface between LAN and EIB/KNX bus IMG/png/abb_router_small_abb.png

Application area

The KNXnet/IP router allows forwarding of telegrams between different lines through a LAN (IP) as fast backbone.
In addition this device is suited to connect a PC to the KNX/EIB network e.g. for ETS programming.
The IP address can be obtained by a DHCP server or by manual configuration (ETS).
This device works according to the KNXnet/IP specifications using the core, the device management, the tunnelling and the routing part (multicast address communication).
The KNX IP Router has a programmable filter table.

Technical data

Electrical safety

Protection (EN 60529): IP 20
Safety extra low voltage SELV DC 24 V

EMC requirements

Complies with EN 61000-6-2, EN 61000-6-3 and EN 50090-2-2

Certification

EIB/KNX

CE norm

Complies with the EMC regulations (residential and functional buildings) and low voltage direc¬tive

Physical specifications

DIN Rail mounted device
Dimensions : 90 x 36 x 64 mm (H x W x D)
Weight: approx. 100 g

Indicators

Learning-LED (red) when in learning mode
Signal-LED (green) for Operating mode display
Signal-LED (yellow) for Network connection indicator & KNX telegram traffic indicator

Ethernet

10/100BaseT (10 or 100 Mbit/s)
Supported internet protocols ARP, ICMP, IGMP, UDP/IP and DHCP

Power supply

External supply 10-35 VDC
Power consumption: 1.9W at 10V

Connectors

EIB/KNX connection terminal
LAN RJ-45 socket for 10/100BaseT connection
Connector for power supply


33, rue Paul Gauguin - 31100 TOULOUSE - FRANCE